Home >> News: July 19th, 2019 >> Story
Satnews Daily
July 19th, 2019

Northrop Grumman Contributes to Made In Space's Robotic Manufacturing in Space 


Made In Space (MIS) just gave Northrop Grumman (NYSE: NOC) a nod of confidence by awarding the company a subcontract to support NASA’s Space Technology Mission Directorate (STMD) demonstration of the autonomous robotic manufacturing and assembly platform, Archinaut, on a flight mission.

The flight demonstration contract award marks the second phase of the NASA-funded Archinaut technology development program which was initially awarded in 2016. Archinaut’s flight demo mission will demonstrate transformative, near-term benefits for the satellite industry. As the project is planned more parties' contributions are enlisted. Please note in July 15, Satnews.com Made in Space Receives NASA Demo Contract for On-Orbit Manufacturing

Robust small satellite power systems manufactured on-orbit, would reduce launch mass and cost by allowing small satellites to host power-intensive payloads previously reserved for larger platforms. These benefits could drastically lower the barrier of entry for new users and revolutionize satellite design.

The objective of Archinaut’s flight demonstration mission is to construct two 10 meter solar arrays, on orbit, to power a small satellite. The Archinaut system will be integrated into an ESPA class satellite bus and launched into space. Once on orbit, Archinaut will employ its extended structure additive manufacturing capabilities and advanced robotics to manufacture and assemble the satellite’s power generation system. The Archinaut-created solar array will yield nearly five times the power currently available to ESPA-class satellites.

This flight demonstration contract award follows a successful ground-based testing campaign of Archinaut’s core additive manufacturing and robotic assembly technologies, qualifying the Archinaut platform for spaceflight. Northrop Grumman supported phase 1 of Archinaut development by hosting thermal vacuum testing at Space Park in California. This testing marked a critical milestone in the Archinaut program to validate the technology readiness of Archinaut’s system for the space environment. Northrop Grumman’s resiliency and rapid prototyping program leveraged its extensive engineering expertise in avionics and systems integration during the first phase of the program.

Richard Stapp, vice president, resiliency and rapid prototyping, Northrop Grumman said that demonstrating additive manufacturing in space will open up new doors in the design and construction of space structures that to date have been limited by the volume of a launch vehicle. Effectively building structures in space is one of the next big steps in their continuous journey of space exploration.